dmesg - AMD A8-3870K

Return To AMD A8-3870K System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-23-generic (buildd@crested) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu4) ) #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 (Ubuntu 3.2.0-23.36-generic 3.2.14)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009c800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000cfda0000 (usable)
 BIOS-e820: 00000000cfda0000 - 00000000cfdd1000 (ACPI NVS)
 BIOS-e820: 00000000cfdd1000 - 00000000cfe00000 (ACPI data)
 BIOS-e820: 00000000cfe00000 - 00000000cff00000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000430000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
DMI: Gigabyte Technology Co., Ltd. GA-A75M-UD2H/GA-A75M-UD2H, BIOS F5 11/03/2011
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x430000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-C7FFF write-protect
  C8000-FFFFF uncachable
MTRR variable ranges enabled:
  0 base 0000000000 mask FF80000000 write-back
  1 base 0080000000 mask FFC0000000 write-back
  2 base 00C0000000 mask FFF0000000 write-back
  3 base 00CFE00000 mask FFFFE00000 uncachable
  4 disabled
  5 disabled
  6 disabled
  7 disabled
TOM2: 0000000430000000 aka 17152M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3326MB, range: 2MB, type UC
total RAM covered: 3326M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 4M 	num_reg: 4  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3326MB, range: 2MB, type UC
e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcfda0 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000f60c0] f60c0
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000097000] 97000 size 20480
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000cfda0000
 0000000000 - 00c0000000 page 1G
 00c0000000 - 00cfc00000 page 2M
 00cfc00000 - 00cfda0000 page 4k
kernel direct mapping tables up to cfda0000 @ 1fffd000-20000000
init_memory_mapping: 0000000100000000-0000000430000000
 0100000000 - 0400000000 page 1G
 0400000000 - 0430000000 page 2M
kernel direct mapping tables up to 430000000 @ cfd9e000-cfda0000
RAMDISK: 364e6000 - 3726b000
ACPI: RSDP 00000000000f7f70 00014 (v00 GBT   )
ACPI: RSDT 00000000cfdd1000 0004C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 00000000cfdd1080 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 00000000cfdd1100 04F7E (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
ACPI: FACS 00000000cfda0000 00040
ACPI: MSDM 00000000cfdd6140 00055 (v03 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: HPET 00000000cfdd61c0 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 00000000cfdd6200 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: EUDS 00000000cfdd6280 00590 (v01 GBT             00000000      00000000)
ACPI: MATS 00000000cfdd6810 00034 (v01 GBT             00000000      00000000)
ACPI: APIC 00000000cfdd6080 000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: MATS 00000000cfdd6880 0632F (v01        MATS RCM 80000001 INTL 20061109)
ACPI: SSDT 00000000cfddcc20 00FD8 (v01 AMD    POWERNOW 00000001 AMD  00000001)
ACPI: SSDT 00000000cfdddc70 00695 (v02    AMD     ALIB 00000001 MSFT 04000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000430000000
Initmem setup node 0 0000000000000000-0000000430000000
  NODE_DATA [000000042fffb000 - 000000042fffffff]
 [ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041f600000-ffff88042f5fffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00430000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000010 -> 0x0000009c
    0: 0x00000100 -> 0x000cfda0
    0: 0x00100000 -> 0x00430000
On node 0 totalpages: 4193580
  DMA zone: 64 pages used for memmap
  DMA zone: 5 pages reserved
  DMA zone: 3911 pages, LIFO batch:0
  DMA32 zone: 16320 pages used for memmap
  DMA32 zone: 830944 pages, LIFO batch:31
  Normal zone: 52224 pages used for memmap
  Normal zone: 3290112 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000cfda0000 - 00000000cfdd1000
PM: Registered nosave memory: 00000000cfdd1000 - 00000000cfe00000
PM: Registered nosave memory: 00000000cfe00000 - 00000000cff00000
PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
Allocating PCI resources starting at cff00000 (gap: cff00000:10100000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88042fc00000 s83072 r8192 d23424 u262144
pcpu-alloc: s83072 r8192 d23424 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4124967
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16415552k/17563648k available (6566k kernel code, 789328k absent, 358768k reserved, 6637k data, 920k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:744 16
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 134217728 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3000.030 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.06 BogoMIPS (lpj=12000120)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 00cff00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
ACPI: Core revision 20110623
ftrace: allocating 27049 entries in 107 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD A8-3870 APU with Radeon(tm) HD Graphics stepping 00
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node   0, Processors  #1
smpboot cpu 1: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
 #2
smpboot cpu 2: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
 #3
smpboot cpu 3: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 4 CPUs
Total of 4 processors activated (24000.19 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region at cfda0000 (200704 bytes)
print_constraints: dummy: 
RTC time: 17:11:14, date: 04/14/12
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
Extended Config Space enabled on 0 nodes
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff]
pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff]
pci 0000:00:00.0: [1022:1705] type 0 class 0x000600
pci 0000:00:02.0: [1022:1707] type 1 class 0x000604
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:04.0: [1022:1709] type 1 class 0x000604
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:10.0: [1022:7812] type 0 class 0x000c03
pci 0000:00:10.0: reg 10: [mem 0xfe028000-0xfe029fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:10.1: [1022:7812] type 0 class 0x000c03
pci 0000:00:10.1: reg 10: [mem 0xfe026000-0xfe027fff 64bit]
pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
pci 0000:00:10.1: PME# disabled
pci 0000:00:11.0: [1022:7801] type 0 class 0x000106
pci 0000:00:11.0: reg 10: [io  0xff00-0xff07]
pci 0000:00:11.0: reg 14: [io  0xfe00-0xfe03]
pci 0000:00:11.0: reg 18: [io  0xfd00-0xfd07]
pci 0000:00:11.0: reg 1c: [io  0xfc00-0xfc03]
pci 0000:00:11.0: reg 20: [io  0xfb00-0xfb0f]
pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f7ff]
pci 0000:00:12.0: [1022:7807] type 0 class 0x000c03
pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
pci 0000:00:12.2: [1022:7808] type 0 class 0x000c03
pci 0000:00:12.2: reg 10: [mem 0xfe02d000-0xfe02d0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: [1022:7807] type 0 class 0x000c03
pci 0000:00:13.0: reg 10: [mem 0xfe02c000-0xfe02cfff]
pci 0000:00:13.2: [1022:7808] type 0 class 0x000c03
pci 0000:00:13.2: reg 10: [mem 0xfe02b000-0xfe02b0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.0: [1022:780b] type 0 class 0x000c05
pci 0000:00:14.2: [1022:780d] type 0 class 0x000403
pci 0000:00:14.2: reg 10: [mem 0xfe020000-0xfe023fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:00:14.3: [1022:780e] type 0 class 0x000601
pci 0000:00:14.4: [1022:780f] type 1 class 0x000604
pci 0000:00:14.5: [1022:7809] type 0 class 0x000c03
pci 0000:00:14.5: reg 10: [mem 0xfe02a000-0xfe02afff]
pci 0000:00:18.0: [1022:1700] type 0 class 0x000600
pci 0000:00:18.1: [1022:1701] type 0 class 0x000600
pci 0000:00:18.2: [1022:1702] type 0 class 0x000600
pci 0000:00:18.3: [1022:1703] type 0 class 0x000600
pci 0000:00:18.4: [1022:1704] type 0 class 0x000600
pci 0000:00:18.5: [1022:1718] type 0 class 0x000600
pci 0000:00:18.6: [1022:1716] type 0 class 0x000600
pci 0000:00:18.7: [1022:1719] type 0 class 0x000600
pci 0000:01:00.0: [1002:679a] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xfdf80000-0xfdfbffff 64bit]
pci 0000:01:00.0: reg 20: [io  0xde00-0xdeff]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.0: PME# disabled
pci 0000:01:00.1: [1002:aaa0] type 0 class 0x000403
pci 0000:01:00.1: reg 10: [mem 0xfdffc000-0xfdffffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:02.0:   bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:02:00.0: reg 10: [io  0xee00-0xeeff]
pci 0000:02:00.0: reg 18: [mem 0xfdbff000-0xfdbfffff 64bit pref]
pci 0000:02:00.0: reg 20: [mem 0xfdbf8000-0xfdbfbfff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:04.0:   bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:04.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci 0000:03:0e.0: [1106:3044] type 0 class 0x000c00
pci 0000:03:0e.0: reg 10: [mem 0xfddff000-0xfddff7ff]
pci 0000:03:0e.0: reg 14: [io  0xcf00-0xcf7f]
pci 0000:03:0e.0: supports D2
pci 0000:03:0e.0: PME# supported from D2 D3hot D3cold
pci 0000:03:0e.0: PME# disabled
pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
pci 0000:00:14.4:   bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:14.4:   bridge window [mem 0xfdc00000-0xfdcfffff pref]
pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
 pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
i2c-core: driver [aat2870] using legacy suspend method
i2c-core: driver [aat2870] using legacy resume method
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009c800 - 000000000009ffff 
reserve RAM buffer: 00000000cfda0000 - 00000000cfffffff 
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
Freeing initrd memory: 13844k freed
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0xfed40000-0xfed44fff window]
pnp 00:00: [mem 0xd0000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io  0x0010-0x001f]
pnp 00:01: [io  0x0022-0x003f]
pnp 00:01: [io  0x0044-0x004d]
pnp 00:01: [io  0x0050-0x005f]
pnp 00:01: [io  0x0062-0x0063]
pnp 00:01: [io  0x0065-0x006f]
pnp 00:01: [io  0x0074-0x007f]
pnp 00:01: [io  0x0091-0x0093]
pnp 00:01: [io  0x00a2-0x00bf]
pnp 00:01: [io  0x00e0-0x00ef]
pnp 00:01: [io  0x04d0-0x04d1]
pnp 00:01: [io  0x0220-0x0225]
pnp 00:01: [io  0x0290-0x0294]
system 00:01: [io  0x04d0-0x04d1] has been reserved
system 00:01: [io  0x0220-0x0225] has been reserved
system 00:01: [io  0x0290-0x0294] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io  0x0900-0x091f]
pnp 00:02: [io  0x0228-0x022f]
pnp 00:02: [io  0x040b]
pnp 00:02: [io  0x04d6]
pnp 00:02: [io  0x0c00-0x0c01]
pnp 00:02: [io  0x0c14]
pnp 00:02: [io  0x0c50-0x0c52]
pnp 00:02: [io  0x0c6c-0x0c6d]
pnp 00:02: [io  0x0c6f]
pnp 00:02: [io  0x0cd0-0x0cd1]
pnp 00:02: [io  0x0cd2-0x0cd3]
pnp 00:02: [io  0x0cd4-0x0cdf]
pnp 00:02: [io  0x0800-0x08fe]
pnp 00:02: [io  0x0a10-0x0a17]
pnp 00:02: [io  0x0b00-0x0b0f]
pnp 00:02: [io  0x0b10-0x0b1f]
pnp 00:02: [io  0x0b20-0x0b3f]
pnp 00:02: [mem 0x00000000-0x00000fff window]
pnp 00:02: [mem 0xfee00400-0xfee00fff window]
pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
system 00:02: [io  0x0900-0x091f] has been reserved
system 00:02: [io  0x0228-0x022f] has been reserved
system 00:02: [io  0x040b] has been reserved
system 00:02: [io  0x04d6] has been reserved
system 00:02: [io  0x0c00-0x0c01] has been reserved
system 00:02: [io  0x0c14] has been reserved
system 00:02: [io  0x0c50-0x0c52] has been reserved
system 00:02: [io  0x0c6c-0x0c6d] has been reserved
system 00:02: [io  0x0c6f] has been reserved
system 00:02: [io  0x0cd0-0x0cd1] has been reserved
system 00:02: [io  0x0cd2-0x0cd3] has been reserved
system 00:02: [io  0x0cd4-0x0cdf] has been reserved
system 00:02: [io  0x0800-0x08fe] has been reserved
system 00:02: [io  0x0a10-0x0a17] has been reserved
system 00:02: [io  0x0b00-0x0b0f] has been reserved
system 00:02: [io  0x0b10-0x0b1f] has been reserved
system 00:02: [io  0x0b20-0x0b3f] has been reserved
system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: [io  0x0000-0x000f]
pnp 00:03: [io  0x0080-0x0090]
pnp 00:03: [io  0x0094-0x009f]
pnp 00:03: [io  0x00c0-0x00df]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [irq 0 disabled]
pnp 00:04: [irq 8]
pnp 00:04: [mem 0xfed00000-0xfed003ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [io  0x0070-0x0073]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io  0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io  0x00f0-0x00ff]
pnp 00:07: [irq 13]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: [io  0x03f8-0x03ff]
pnp 00:08: [irq 4]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: [io  0x0378-0x037f]
pnp 00:09: [irq 7]
pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:0a: [mem 0xe0000000-0xefffffff]
system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [mem 0x000d4200-0x000d7fff]
pnp 00:0b: [mem 0x000f0000-0x000f7fff]
pnp 00:0b: [mem 0x000f8000-0x000fbfff]
pnp 00:0b: [mem 0x000fc000-0x000fffff]
pnp 00:0b: [mem 0xcfda0000-0xcfdfffff]
pnp 00:0b: [mem 0xffff0000-0xffffffff]
pnp 00:0b: [mem 0x00000000-0x0009ffff]
pnp 00:0b: [mem 0x00100000-0xcfd9ffff]
pnp 00:0b: [mem 0xcfe00000-0xcfefffff]
pnp 00:0b: [mem 0xcff00000-0xcfffffff]
pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:0b: [mem 0xfec00000-0xfec00fff]
pnp 00:0b: [mem 0xfee00000-0xfee00fff]
pnp 00:0b: [mem 0xfff80000-0xfffeffff]
pnp 00:0b: [Firmware Bug]: [mem 0x00000000-0xffffffffffffffff disabled] covers only part of AMD MMCONFIG area [mem 0xe0000000-0xefffffff]; adding more reservations
system 00:0b: [mem 0x000d4200-0x000d7fff] has been reserved
system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:0b: [mem 0xcfda0000-0xcfdfffff] could not be reserved
system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved
system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0b: [mem 0x00100000-0xcfd9ffff] could not be reserved
system 00:0b: [mem 0xcfe00000-0xcfefffff] has been reserved
system 00:0b: [mem 0xcff00000-0xcfffffff] could not be reserved
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] could not be reserved
system 00:0b: [mem 0xfff80000-0xfffeffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:01:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:02.0:   bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:04.0:   bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:04.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03-03]
pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
pci 0000:00:14.4:   bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:14.4:   bridge window [mem 0xfdc00000-0xfdcfffff pref]
pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:04.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: resource 9 [mem 0xd0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:02: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:03: resource 9 [mem 0xd0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:10.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:10.0: PCI INT A disabled
pci 0000:00:10.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:10.1: PCI INT B disabled
pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:12.0: PCI INT A disabled
pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:12.2: PCI INT B disabled
pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:13.0: PCI INT A disabled
pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:13.2: PCI INT B disabled
pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:14.5: PCI INT C disabled
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800cbd9e000 - ffff8800cfd9e000
software IO TLB at phys 0xcbd9e000 - 0xcfd9e000
perf: AMD IBS detected (0x000000ff)
audit: initializing netlink socket (disabled)
type=2000 audit(1334423474.832:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.17)
msgmni has been set to 32088
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
ERST: Table is not found!
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:11.0: irq 40 for MSI/MSI-X
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio 
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfe02f000 port 0xfe02f100 irq 40
ata2: SATA max UDMA/133 abar m2048@0xfe02f000 port 0xfe02f180 irq 40
ata3: SATA max UDMA/133 abar m2048@0xfe02f000 port 0xfe02f200 irq 40
ata4: SATA max UDMA/133 abar m2048@0xfe02f000 port 0xfe02f280 irq 40
ata5: SATA max UDMA/133 abar m2048@0xfe02f000 port 0xfe02f300 irq 40
ata6: SATA max UDMA/133 abar m2048@0xfe02f000 port 0xfe02f380 irq 40
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
QUIRK: Enable AMD PLL fix
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02d000
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe02b000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe02e000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02c000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe02a000
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:10.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
xhci_hcd 0000:00:10.0: setting latency timer to 64
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
xhci_hcd 0000:00:10.0: irq 18, io mem 0xfe028000
xhci_hcd 0000:00:10.0: irq 41 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 42 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 45 for MSI/MSI-X
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 7
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
xhci_hcd 0000:00:10.1: setting latency timer to 64
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 8
xhci_hcd 0000:00:10.1: irq 17, io mem 0xfe026000
xhci_hcd 0000:00:10.1: irq 46 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 47 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 48 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 49 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 50 for MSI/MSI-X
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 9
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
i8042: If AUX port is really absent please use the 'i8042.noaux' option
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
Refined TSC clocksource calibration: 2999.964 MHz.
Switching to clocksource tsc
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
usb 8-1: new full-speed USB device number 2 using xhci_hcd
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
ata2.00: ATA-9: OCZ-VERTEX3, 2.06, max UDMA/133
ata2.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      OCZ-VERTEX3      2.06 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 1:0:0:0: [sda] Attached SCSI disk
usb 8-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
  Magic number: 8:458:188
acpi device:1a: hash matches
rtc_cmos 00:05: setting system clock to 2012-04-14 17:11:16 UTC (1334423476)
powernow-k8: Found 1 AMD A8-3870 APU with Radeon(tm) HD Graphics (4 cpu cores) (version 2.20.00)
powernow-k8:    0 : pstate 0 (3000 MHz)
powernow-k8:    1 : pstate 1 (2700 MHz)
powernow-k8:    2 : pstate 2 (2400 MHz)
powernow-k8:    3 : pstate 3 (2100 MHz)
powernow-k8:    4 : pstate 4 (1900 MHz)
powernow-k8:    5 : pstate 5 (1500 MHz)
powernow-k8:    6 : pstate 6 (1200 MHz)
powernow-k8:    7 : pstate 7 (800 MHz)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 920k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1608k freed
Freeing unused kernel memory: 1196k freed
udevd[105]: starting version 175
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
r8169 0000:02:00.0: setting latency timer to 64
r8169 0000:02:00.0: irq 51 for MSI/MSI-X
r8169 0000:02:00.0: eth0: RTL8168evl/8111evl at 0xffffc900125d6000, 50:e5:49:52:23:a0, XID 0c900800 IRQ 51
r8169 0000:02:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
firewire_ohci 0000:03:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
input: ELAN USB KEYBOARD as /devices/pci0000:00/0000:00:10.1/usb8/8-1/8-1:1.0/input/input2
generic-usb 0003:0566:3015.0001: input,hidraw0: USB HID v1.10 Keyboard [ELAN USB KEYBOARD] on usb-0000:00:10.1-1/input0
EXT4-fs (sda2): INFO: recovery required on readonly filesystem
EXT4-fs (sda2): write access will be enabled during recovery
generic-usb: probe of 0003:0566:3015.0002 failed with error -22
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 8-2: new full-speed USB device number 3 using xhci_hcd
firewire_ohci: Added fw-ohci device 0000:03:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
EXT4-fs (sda2): recovery complete
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
firewire_core: created device fw0: GUID 0049e5509b8c0200, S400
usb 3-1: new full-speed USB device number 2 using ohci_hcd
ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[366]: starting version 175
input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input3
generic-usb 0003:1532:0101.0003: input,hidraw1: USB HID v1.00 Mouse [Razer Razer Copperhead Laser Mouse] on usb-0000:00:12.0-1/input0
input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/input/input4
generic-usb 0003:1532:0101.0004: input,hidraw2: USB HID v0.01 Keyboard [Razer Razer Copperhead Laser Mouse] on usb-0000:00:12.0-1/input1
Adding 16720080k swap on /dev/sda3.  Priority:-1 extents:1 across:16720080k SS
lp: driver loaded but no devices found
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
[fglrx] Maximum main memory to use for locked dma buffers: 15672 MBytes.
[fglrx]   vendor: 1002 device: 679a count: 1
[fglrx] ioport: bar 4, base 0xde00, size: 0x100
pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:01:00.0: setting latency timer to 64
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
USB Serial support registered for FTDI USB Serial Device
ftdi_sio 8-2:1.0: FTDI USB Serial Device converter detected
usb 8-2: Detected FT232RL
usb 8-2: Number of endpoints 2
usb 8-2: Endpoint 1 MaxPacketSize 64
usb 8-2: Endpoint 2 MaxPacketSize 64
usb 8-2: Setting MaxPacketSize 64
usb 8-2: FTDI USB Serial Device converter now attached to ttyUSB0
usbcore: registered new interface driver ftdi_sio
ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
lp0: using parport0 (interrupt-driven).
udevd[436]: renamed network interface eth0 to eth2
ppdev: user-space parallel port driver
hda_codec: ALC889: BIOS auto-probing.
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HD-Audio Generic Line-Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HD-Audio Generic Line-Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HD-Audio Generic Line-Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HD-Audio Generic Line-Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
snd_hda_intel 0000:01:00.1: irq 52 for MSI/MSI-X
snd_hda_intel 0000:01:00.1: setting latency timer to 64
type=1400 audit(1334423489.676:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=683 comm="apparmor_parser"
type=1400 audit(1334423489.676:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=693 comm="apparmor_parser"
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
type=1400 audit(1334423489.676:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=683 comm="apparmor_parser"
type=1400 audit(1334423489.676:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=693 comm="apparmor_parser"
type=1400 audit(1334423489.676:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=683 comm="apparmor_parser"
type=1400 audit(1334423489.676:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=693 comm="apparmor_parser"
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
Too many HDMI devices
Too many HDMI devices
Too many HDMI devices
Too many HDMI devices
Too many HDMI devices
Too many HDMI devices
Too many HDMI devices
Too many HDMI devices
hda-codec: out of range cmd 0:0:2f90:707:0
hda-codec: out of range cmd 0:0:2f90:708:85
hda-codec: out of range cmd 0:0:2f90:f00:c
hda-codec: out of range cmd 0:0:2f90:709:0
hda-codec: out of range cmd 0:0:2f90:f09:0
hda-codec: out of range cmd 0:0:e0:f0d:0
HDMI status: Codec=0 Pin=2 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=0 Pin=7 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=0 Pin=9 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=0 Pin=12176 Presence_Detect=1 ELD_Valid=1
hda-codec: out of range cmd 0:0:2f90:f2e:8
hda_codec: cannot build controls for #0 (error -16)
hda_codec: cannot revert codec
snd_hda_intel 0000:01:00.1: PCI INT B disabled
snd_hda_intel: probe of 0000:01:00.1 failed with error -16
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90013000000, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
init: failsafe main process (837) killed by TERM signal
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
type=1400 audit(1334423495.432:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=904 comm="apparmor_parser"
type=1400 audit(1334423495.432:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=904 comm="apparmor_parser"
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1334423495.452:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=935 comm="apparmor_parser"
type=1400 audit(1334423495.452:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=936 comm="apparmor_parser"
type=1400 audit(1334423495.452:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=936 comm="apparmor_parser"
type=1400 audit(1334423495.452:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=936 comm="apparmor_parser"
type=1400 audit(1334423495.456:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=939 comm="apparmor_parser"
type=1400 audit(1334423495.456:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=939 comm="apparmor_parser"
type=1400 audit(1334423495.456:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=937 comm="apparmor_parser"
type=1400 audit(1334423495.456:17): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=943 comm="apparmor_parser"
r8169 0000:02:00.0: eth2: link down
r8169 0000:02:00.0: eth2: link down
ADDRCONF(NETDEV_UP): eth2: link is not ready
ADDRCONF(NETDEV_UP): eth2: link is not ready
fglrx_pci 0000:01:00.0: irq 52 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1258
[fglrx] Firegl kernel thread PID: 1259
[fglrx] Firegl kernel thread PID: 1260
[fglrx] IRQ 52 Enabled
[fglrx] Gart USWC size:1280 M.
[fglrx] Gart cacheable size:508 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000 
[fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000 
[fglrx] Reserved FB block: Unshared offset:fff8000, size:8000 
[fglrx] Reserved FB block: Unshared offset:bfff4000, size:c000 
r8169 0000:02:00.0: eth2: link up
ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
eth2: no IPv6 routers present

Return To AMD A8-3870K System Information